
Wall Mounting Done Right
Get your TV off the stand and securely on the wall, level, at the right height, with the cords tidied up.
A wall-mounted TV frees up floor space, keeps the screen out of reach of small children and pets, and makes a room look finished. It also has to hold a heavy, expensive screen for years. Dothan Handyman mounts TVs for homeowners in Dothan, Alabama, with the attention to studs, anchors and level that the job needs.
Every wall is different. Drywall over wood studs, brick, and fireplace surrounds each call for a different approach. We look at where you want the TV, what the wall is made of, and how you plan to connect your devices before we drill a single hole.
The right setup depends on the room, the wall, and how you watch. These are the most common requests.
A fixed mount holds the TV flat and close to the wall for a clean look. A tilting mount angles the screen down a little, which helps when the TV sits higher, such as above a dresser or fireplace.
An articulating arm lets you pull the TV out and swing it toward different seats. These mounts put more stress on the wall, so secure fastening into studs is especially important.
Brick, block and stone need masonry anchors and the right drill bits. Above a fireplace, we also consider heat and viewing height before recommending the spot.
Cords can be tidied with a paintable cover on the wall, or run inside the wall with a proper in-wall kit. We will explain which option suits your wall and setup.
We locate studs or use anchors rated for the wall material and the weight of your TV and mount, so the screen stays put.
We mark the position, check it with you, and level the mount before the TV goes up, so it looks right from where you sit.
We protect floors and furniture, clean up drywall dust, and leave the area tidy when we are done.
If your setup needs a new outlet behind the TV or new wiring, we will tell you up front and recommend a licensed electrician for that part.
Tell us the TV size, the wall it is going on, and the mount you have or want.
Free — no obligations
Share the TV size and model, the room, the wall surface, and whether you already have a mount. A photo of the wall helps.
We confirm the height and position with you, check for studs, and look for anything behind the wall that should be avoided.
The mount is fastened securely, leveled, and the TV is hung and checked. Cords are tidied using the option we agreed on.
We make sure the TV is secure and your devices are connected, then walk through the finished setup with you.
Check the back of your TV for its weight and VESA mounting pattern, the square of screw holes measured in millimeters, such as 200 x 200 or 400 x 400. Your mount needs to match the pattern and be rated for more than the TV's weight. Most mounts list both on the box.
Think about where your cable box, game console or soundbar will go, and where the nearest outlet is. Hiding the power cord inside the wall is not as simple as hiding an HDMI cable. Standard power cords are not made to run inside walls. A recessed power kit made for in-wall use, or an outlet added behind the TV by a licensed electrician, is the safe way to do it.
Most flat screen TVs can be wall mounted. The limit is usually the mount, not the TV. Check the weight rating and the VESA hole pattern on the back of your TV, then choose a mount rated for both. If you have not bought a mount yet, we can help you pick one.
A common guide is to put the center of the screen close to eye level when you are seated, often around 42 inches from the floor in a living room. Over a fireplace or in a bedroom it will usually sit higher, and a tilting mount can help with the viewing angle. We will mark the spot and check it with you before drilling.
Often, yes. Low-voltage cables like HDMI can run inside the wall through proper wall plates. The TV's power cord should not be run inside a wall on its own. That calls for a recessed power kit made for in-wall use, or a new outlet installed by a licensed electrician. Where an in-wall run is not practical, a paintable cord cover on the wall is a tidy alternative.
Many fireplaces and brick walls can take a TV with the right anchors and a suitable mount. Heat, viewing height and what is behind the surface all matter, so we look at the wall first and tell you plainly if it is not a good spot.